Clarion CZ500 - Manual (Page 14)

English
Français
English
Italiano
English
Español
English
English
English
14
HD Radio Operations
About HD Radio ™ technology
HD Radio technology allows CD-quality digital
broadcasting of your local AM and FM radio
stations. HD Radio broadcasts can include
multiple channels on the same frequency,
which is called multicasting. With multicasting,
you can receive up to eight additional
multicast channels: HD1–HD8.
With an HD Radio tuner connected, you
will receive HD Radio digital broadcasts
automatically when tuned to a station that
offers HD Radio technology.
NOTE: Not all FM or AM stations offer
HD Radio (digital) broadcasting. You can
receive both analog and digital stations
with the unit.
Accessing radio mode
Press the [SRC] button on the front panel or
remote control to switch to the RADIO source,
and HD icom will light when a THD300 is
connected.
Select a band
Press the [BAND] button to change between
three FM and one AM bands. Each band
stores up to six preset stations.
Tuning
- Seek Tuning
Press and hold the [ ] or [ ] button to
seek the next/previous station automatically.
- Manual Tuning
Press the [ ] or [ ] button to move the
radio frequency number up or down one step.
HD radio multicast channels
To tune to an HD Radio multicast channel,
tune to the main signal and then press the
[MENU] button on the front panel. PTY is
displayed. Select PTY or SUB CH by rotating
the [VOLUME] knob and press to confirm.
• Select PTY type from the category list by
rotating the [VOLUME] knob and press it.
• Select SUB CH by rotating the [VOLUME]
knob and press it.
• Multi channel is available when a digital
signal is detected, the DIGITAL icon
will light. If the digital signal becomes
unavailable, the unit will revert to Analog
reception.
Preset stations
Up to six stations on each band can be
stored as presets, which can then be instantly
recalled by pressing the associated preset
button. To store a station, turn the radio on
and select the desired band and station.
Press and hold the desired preset button
(numbered one through six on the face of the
radio or remote control) for more than two
seconds. When stored, the preset number
will appear in the display. The station is now
stored and can be recalled by pressing the
corresponding preset button. Repeat for the
remaining five presets on the current band
and for presets on the other four bands.
NOTE: Multicast stations can be stored as
presets, but the unit must be in Digital or
Auto reception mode to receive them.
Preset scan
Press the [PS/AS] button to scan and play all
preset stations for 10 seconds each. Press
the [PS/AS] button again to stop scanning
and play the current station.
Automatic store (AS)
Press and hold the [PS/AS] button to select
six strong stations and store them in the
current band using the auto store function.
After entering the stations into memory, the
unit will automatically stop at each station for
five seconds, allowing you to preview each
selection. When using the auto store function,
the new stations replace any stations already
stored in preset memory.
NOTE:
You can stop the auto store function at any
time by pressing the [PS/AS] button again.