Clarion CZ500 - Manual (Page 21)

English
Français
Español
Italiano
Español
Español
Español
Español
Español
21
Press the [SOUND] button to enter sound
effect setting mode. First press shows current
EQ. Rotate the [VOLUME] knob to change
the options in the following order: OFF →
B-BOOST → IMPACT → EXCITE → CUSTOM
Press the [SOUND] button, then press [ ,
] to select USER preset including:
BALANCE → FADER → M-B EX → LPF(low
pass filter) → SUBW VOL, rotate the
[VOLUME] knob to select a value.
Audio Setup
System Setup
BALANCE: LEFT 1-7→ CENTER → RIGHT
1-7
FADER: LEFT 1-7→ CENTER → RIGHT 1-7
M-BEX: ON/OFF
LPF: THROUGH/80/120/160
SUBW VOL: (-6) - (+6)
Press and hold the [D] button to enter system
MENU. Press [ , ] to select options,
rotate the [VOLUME] knob to adjust.
CLOCK
Press the knob to enter clock setting mode.
Rotate the knob to set clock, press [ ] or
[ ] to select hour or minute, press and hold
the knob to confirm.
DX/LO
Rotate the knob to choose radio local or
distant.
LO: Only stations with strong signal can be
received.
DX: Stations with strong and weak signals can
be received.
AUX SENS
While in AUX mode, rotate the knob to choose
AUX Input sensitivity LOW, MID or HIGH.
SCRN SVR: ON/OFF
Rotate the knob to choose screen saver on
or off.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: TRACK →
FOLDER → FILE → ALBUM → TITLE →
ARTIST → TRACK → ...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
ID3 TAG information by pressing the [DISP]
button.
DIMMER: ON/OFF
Rotate the knob to choose dimmer on or off.
ON: The LCD is dimmed when the interior
light is on.
OFF: The LCD stays at maximum brightness.
BEEP: ON/OFF
Rotate the knob to choose button beep sound
on or off.
12/24H
Rotate the knob to choose time format: 12 or
24 hour.
BT menu
While in BT mode, press and hold the [D]
button to enter BT MENU. Press [ , ] to
select options, rotate the [VOLUME] knob to
adjust.
AUTO CON
Rotate the knob to choose connect
automatically or not.
PIN CODE
Rotate and press the knob to choose a 4-digit
password. Press the knob more than two
seconds to confirm.