Clarion CZ500 - Manual (Page 30)

English
Français
English
Italiano
English
Español
English
English
English
30
• Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
8) Connecting the Accessories
Front right
Front left
Front right
Front left
Front right
Front left
Not used.
Insulate each wire
Gray
16-pin connector extension lead
(attached to the source unit)
Gray/Black
White
White/Black
Purple
Purple/Black
Green
Green/Black
Gray
Gray/Black
White
White/Black
Purple
Purple/Black
Green
Green/Black
Yellow wire (Memory back-up lead)
Connect directly to battery
Red wire (Power lead)
Accessory 12 V
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
Black wire (Ground lead)
Connect to vehicle chassis ground
Orange/White wire (Illumination lead)
Connect it to the car power supply terminal
for illumination
Blue wire (Auto antenna lead)
Connect it to the car power supply terminal
for antenna
4-speaker system
or
2-speaker system