Clarion CZ500 - Manual (Page 18)

English
Français
English
Italiano
English
Español
English
English
English
18
Press the [SRC] button on the panel or
remote control to select AUX.
AUX is just for Audio content with 3.5 mm
Jack connector plugged into audio-in socket
on the front panel.
AUX Operations
1. Insert a USB device into the USB
connector.
When connecting a USB device, the unit
will read the files automatically.
2. To remove the USB device, you should first
select another source, in order to avoid
damaging the USB device. Then remove
the USB device.
USB Operations
Connect
Connect an iPod or iPhone to the USB using
a USB cable.
When connecting a device, the unit will read
the files automatically. The track information
displays on the screen once playback starts.
MENU
Press the [MENU] button repeatedly to show
PLAY LISTS, rotate the knob to show PLAY
LISTS / ARTISTS / ALBUMS / GENRES /
SONGS / COMPOSERS, press and rotate the
knob to select a desired option, then press
the knob to confirm.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your iPod/
iPhone repeatedly.
iPod & iPhone Operations
1. Press the [RPT] button once or more until
“TRK RPT” appears on the LCD to perform
repeat play.
2. Press the [RPT] button repeatedly until
“ALL RPT” appears on the LCD for all
tracks repeat play.
3. Press the [RPT] button repeatedly until
“RPT OFF” appears on the LCD to cancel
repeat playback.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1. Press the [RDM] button repeatedly until
“RDM ALBUM” appears on the LCD for
album random play.
2. Press the [RDM] button once or more until
“RDM SONG” appears on the LCD to
perform random play.
3. Press the [RDM] button repeatedly until
“RDM OFF” appears on the LCD to cancel
random playback.
AUX input sensitivity setting
1. Press and hold the [D] button.
2. Press the [ , ] button to select “AUX
SENS”.
3. If the output level of connected external
audio player is “High”, rotate [VOL/SEL]
knob and choose “AUX LOW”. And if the
output level is “Low”, choose “AUX HIGH”.