Clarion CZ500 - Manual (Page 7)

English
Français
Español
Italiano
Español
Español
Español
Español
Español
7
Storing the DCP in the DCP Case
The control panel can be detached to prevent
theft. When detaching the control panel, store
it in the DCP (DETACHABLE CONTROL
PANEL) case to prevent scratches.
We recommend taking the DCP with you
when leaving the car.
1. Press the [ ] button (2 sec.) to turn off the
power.
2. Depress the [OPEN] button to unlock the
DCP.
3. Grab the edge that pops out and remove
the DCP.
1. Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
Hold the DCP, in the orientation as shown in
the figure below, and put it into the supplied
DCP case. (Ensure the DCP is in the correct
orientation.)
DCP
DCP case
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be carefully not
to drop it or subject it to strong shocks.
• The connector connecting the source
unit and the DCP is an extremely
important part. Be careful not to damage
it by pressing on it with fingernails,
screwdrivers, or other hard objects.
Note:
If the DCP is dirty, wipe off the dirt with a soft,
dry cloth only.
Remove the DCP
Re-attach the DCP