CREATIVE 2030 - Manual (Page 50)

Configuring the Wireless LAN USB Adapter 4-4
12.To set the Wireless LAN USB Adapter to power saving mode, click the Power
Saving Mode box, and then click Enabled.
In Ad-hoc mode, the Power Saving Mode is not supported.
13.Click the Apply Changes button to save the settings.
Site Survey Settings 1. Click the Site Survey tab (see Figure 4-4).
2. Click the Search button to display or
refresh the list of available Access Points or
ad-hoc stations.
3. Click the Access Point or a wireless network
device you want to link with.
4. Click the Connect button.
Your computer automatically connects to
the selected Access Point or wireless
network device.
Figure 4-4: Site Survey tab
The entries in the Link Info
tab is automatically updated
to reflect the selected Access
Point or ad-hoc station.