CREATIVE 2030 - Manual (Page 55)

Configuring the Wireless LAN USB Adapter 4-9
Encryption settings 1. Right-click the Wireless Network Configuration icon on the taskbar, and then
click View Available Networks.
2. When the Connect to Wireless Network dialog box similar to Figure 4-9
appears, click the Advanced button.
3. A Wireless Network Connection Properties
dialog box similar to Figure 4-10 will pop up.
If your Access Point or ad-hoc server appears in
the Preferred Networks section, click on it and click
the Properties button.
If your Access Point or ad-hoc server does not
appear in the Preferred networks section, then
click the Refresh button, the click the network
that you want from the list of available networks,
then click the Configure button.
Figure 4-10:Wireless Network
Connection
Properties dialog
box
If you cannot find your Access
Point, click the Refresh
button.