CREATIVE 2030 - Manual (Page 58)

Configuring the Wireless LAN USB Adapter 4-12
Using the
Configuration Utility 1. Right-click the Configuration Utility icon (Figure 4-1) on the taskbar, and then
click Exit.
2. Right-click the Wireless Network Connection icon (Figure 4-8) on the taskbar,
and then click View Available Wireless Networks.
3. When the Connect to Wireless Network dialog box similar to Figure 4-9
appears, click the Advanced button.
4. When the Wireless Network Connection Properties dialog box similar to
Figure 4-10 appears, click the Use Windows to configure my wireless
network settings check box to clear it. If you want to use the Wireless Network
Connection later, be sure to click this check box to select it.
5. Click the OK button.
For the remaining steps, refer to “Configuring Settings” on page 4-2.
When Wireless Network
Connection is enabled, you
cannot use the
Configuration Utility to
configure the settings.
Therefore, the Wireless
Network Connection needs
to be disabled.