CREATIVE 2030 User Manual
Page 62
Configuring Your Computer’s Network Settings 5-3
5. When the dialog box similar to Figure 5-2
appears, click the IP Address tab.
If you are using a Dynamic IP address,
proceed to step 6. For users with a Static IP
address, go to step 8.
6. Click the Obtain an IP address
automatically option to select it and click
the OK button.
7. Click the OK button.
8. When Windows prompts you to restart your
computer, click the Yes button to restart
your computer.
This completes the Ethernet configuration,
therefore skip the remaining steps.
9. Click the Specify an IP Address option to
select it.
10.Type the relevant information in the IP
Address and Subnet Mask boxes, and
then click the Gateway tab.
11.When the dialog box similar to Figure 5-3
appears, type the new gateway address in
the New gateway box, and then click the
Add button.
12.Click the DNS Configuration tab
Figure 5-2
Figure 5-3