Citation Stereo Receiver - Manual (Page 10)

10
Quick-Star
t Instr
uctions
SIDE BACK REC A CENTER FRONT
STEREO
SUB
DIGITAL AUDIO INPUTS
ANALOG AUDIO INPUTS
1
L
R
2 3 4
7 8 9 10 12 11
5 6
L
R
REMOTE
ZONE
TRIGGERS
TRIG 1 TRIG 2 IR IN
IN 3 IN 2 IN 1
IN 4 IN 5 IN 6 IN 2
IN 1
CITATION BUS
115V ~ 60Hz
75 WATTS AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
C A U T I O N C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE. DO NOT
REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
SERIAL NUMBER
COMPOSITE VIDEO S – VIDEO
MONO SUB
AUDIO OUTPUTS
Manufactured under license from Dolby Laboratories Licensing Corporation. "Dolby", "AC-3",
"Pro Logic" and the Double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation. Copyright 1992 Dolby Laboratories, Inc. All rights reserved.
Additionally licensed under U.S. patent numbers 5,172,415; 5,263,087; 5,307,415; 5,280,528;
5,339,363; 5,295,189; 4,932,059; 5,428,687: 5,504,819 and patents pending.
5.0 AV Controller
Manufactured in the USA
REC A RMT ZONE
AUX MAIN
+ VDC
1 2 3
GND
4
REC A RMT ZONE
AUX MAIN
OUT
®
NRTL / C
LR110480
CSA E65
OUT
Connect to output
of composite
video sources Connect to coaxial
digital audio output
of A/V sources, DVD,
HDTV, CD, etc.
Connect to optical
digital audio output
of A/V sources, DVD,
HDTV, CD, etc. Connect to
composite
video input of
main monitor Connect to
composite
video input
of a VCR Connect to
S-Video input
of main monitor
Connect to
S-Video input
of VCRs
Connect to
analog audio
output of A/V
sources, CD,
tuner, etc. Connect to
audio input
of VCR or
audio recorders Connect to
analog audio
input of a
multiroom-audio-
distribution system
or a 2nd audio
recorder or VCR Connect to
inputs of audio
power amplifiers Connect to
“DC IN” remote
jack on compatible
Citation power
amplifiers Connect to voltage-
compatible screen
control systems or
other compatible
low-voltage controlled
products
Connect AC Power
to non-switched
wall outlet
Connect to S-Video
output sources Connect to
composite video
input of a multiroom-
video-distribution
system or a 2nd VCR
Connect to
composite video
output of a
multiroom-video-
distribution system
or a 2nd VCR
Quick-Start Connection and Setup
Note: These are the minimum hook-up connections required to install a Citation 5.0. In order to
obtain the maximum benefit from the 5.0’s many features and to ensure correct connections,
please follow the detailed connection, setup and configuration instructions in this manual.
1. First, please make certain that ALL electronic equipment, including any amplifiers, source equip-
ment and, of course, your Citation 5.0 are unplugged from AC power outlets. Many audio/video
devices contain automatic turn-on circuits which may be triggered during the setup process.
Disconnecting them until they are required is a good safety habit that will also reduce the possibility
of damage to your components due to unintended turn-on.
2. Using high-quality interconnect cables, connect the video, analog audio and digital audio outputs
of your source equipment to the Citation 5.0 according to the locations shown on the chart on the
next page. While the great flexibility of the 5.0 makes it possible to connect source gear in an almost
unlimited number of combinations, using these presets will simplify getting started. You may always
add additional equipment or change connection locations later, following the instructions found in
this manual. When connecting tape recorders, remember to use the “Play/Out” jacks on the recorder
for connection to the 5.0’s inputs.