Rear panel connections – Citation Stereo Receiver User Manual
Page 17
°
S-Video Main Output:
Connect this jack to the main video display device that will be used to
view the output of the source selected by the 5.0.
·
S-Video Inputs:
Connect the output of S-video sources to these input jacks. Once the inputs have
been connected, they may be assigned to any of the 5.0’s program profiles using the
Programs
Setup Menu
(see page 37).
Important Note on S-Video Sources:
The 5.0 does not convert standard, composite video input
signals into S-video outputs. In order for a video signal to appear at any of the S-video outputs,
the input program must contain S-video source.
a
Record A Composite Video Output:
Connect this jack to the standard video “REC IN” jack of a
VCR to record the input selected by the 5.0.
b
Auxiliary Composite Video Output:
This jack provides an additional composite video output
connection for the source selected for the main viewing room.
c
Composite Video Remote Zone Output:
This jack provides a standard, composite video signal
for the remote zone location. This input is selected by using the
Remote Zone Input
buttons
R
on
the remote control.
d
Main Composite Video Output:
Connect this jack to the composite video input of the TV set,
video monitor, projection television or other video display device that will be used in the main
viewing location.
e
Composite Video Inputs:
Connect the output of composite video sources to these input jacks.
Once the inputs have been connected, they may be assigned to any of the 5.0’s program profiles
using the
Programs Setup Menu
(see page 37).
f
Optical Digital Audio Inputs:
Connect the optical (TosLink) digital audio output of audio
sources to these jacks. Once the inputs have been connected, they may be assigned to any of the
5.0’s program profiles using the
Programs Setup Menu
(see page 37).
g
Coax Digital Audio Inputs:
Connect the coax digital audio output of audio sources to these jacks.
Once the inputs have been connected, they may be assigned to any of the 5.0’s program profiles
using the
Programs Setup Menu
(see page 37).
17
Rear Panel Connections