Citation Stereo Receiver - Manual (Page 16)

¢ Front Channel Audio Outputs: Connect these jacks to the inputs of the audio power amplifier
feeding the front left and right speakers.
∞ Center Channel Audio Output: Connect this jack to the input of the audio power amplifier
feeding the center channel speaker.
§ Mono Subwoofer Output: Connect this jack to the line-level mono input of a powered subwoofer,
or the input of an audio amplifier driving a single passive subwoofer.
¶ Side Channel Outputs: If Citation or other Dual Drive speakers are used, connect these jacks to
the amplifier driving the side channel speaker inputs. If separate side channel speakers are mounted
on the left and right walls of the room, connect these jacks to the amplifier providing power to those
speakers.
• Back Channel Outputs: If Citation or other Dual Drive speakers are used, connect these jacks
to the amplifier driving the back channel speaker inputs. If separate speakers are mounted on the rear
wall of the listening room, connect the jacks to the amplifier providing power to those speakers.
ª Stereo Subwoofer Outputs: When two subwoofers are installed, connect the outputs of these
jacks to the input of the powered subwoofers or to the input of the audio power amplifier driving
passive subwoofers.
‚ IR In: An external infrared sensor may be connected to this jack for use in sending remote com-
mands to the 5.0 when the front panel IR Sensor @ is blocked, or when a remote sensor is used to
control the input and volume from a remote zone location. Selection of the control path for a sensor
connected to this jack is controlled via the
IR Mode setting on the System Options Menu (see
page 40).
⁄ Trigger 1 Output: This jack may be used to supply a trigger control voltage for Citation audio
power amplifiers or other compatible devices such as projection screens or automatic blinds designed
to accept low-voltage on/off control signals. Programming the triggers with regard to the commands
they respond to (e.g., Power, Mute or Display Dim) is controlled through the
Program Triggers
line on the System Options Menu (see pages 41– 42). Setup for the action of the trigger when a
specific input is used is programmed through the Programs Setup Menu (see page 37).
Trigger 2 Output: The function of this trigger is identical to Trigger 1, except that it is typically
used to control external devices such as screens, blinds or lighting controls. Trigger 1 is typically used
for control of audio power amplifiers. Of course, the decision of the devices controlled is entirely
user-selectable.
‹ Citation Bus Control Port: This plug is provided to permit operation of the Citation 5.0 by
computers or optional wired remote control or home automation systems. The use of this control
port requires additional, optional software and it is strongly recommended that a Citation dealer be
consulted before any connections are made to this port.
› Power Cord: Connect this plug to an unswitched AC power outlet.
fi S-Video Record Output: Connect this jack to the S-video input of an S-video device to record the
selected input source when S-video is present.
fl S-Video Auxiliary Output: This jack provides an additional S-video output connection for the
input source selected for the main viewing room.
‡ S-Video Remote Zone Output: This jack provides an S-video signal for the remote zone
location when an S-video source is selected using the Remote Zone Indicator buttons R on the
remote control.
16
Rear Panel Connections