Citation Stereo Receiver - Manual (Page 8)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
interference received, including interference that may cause undesired operation.
Note: Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC
Rules and may void the user’s authority to operate the equipment.
Unpacking
The carton and shipping materials used to protect your new 5.0 during shipment were specially
designed to cushion it from shock and vibration. We suggest that you save the carton and packing
materials for use in shipping if you move or should the unit ever need repair.
To minimize the size of the carton in storage, you may wish to flatten it. This is done by carefully
slitting the tape seams on the bottom and collapsing the carton down to a more two-dimensional
appearance. Other cardboard inserts may be stored in the same manner. Packing materials that
cannot be collapsed should be saved along with the carton in a plastic bag.
If you do not wish to save the packing materials, please note that the carton and other sections of the
shipping protection are recyclable. Please respect the environment and discard those materials at the
local recycling center.
Typographic Conventions
In order to help you use this manual with diagrams of the remote control, front panel controls,
rear panel connections and on-screen menus, certain conventions have been used.
Example – (bold type) indicates a specific remote control or front panel button, or rear panel
connection jack.
Example – (OCR type) indicates a message that is visible through the on-screen menu system or
on the front panel information display.
1 – (Number in a square) indicates a specific front panel control.
¡ – (Number in a circle) indicates a rear panel connection.
å – (Letter in a circle) indicates a button on the main portion of the remote control.
A – (Letter in a square) indicates a button under the sliding panel on the lower portion of the
remote control.
References to “OSD” indicate a display message that appears through the on-screen menu system.
References to “FPD” indicate a display message that appears in the front panel information display.
A complete index of OSD and FPD figures appears on page 70.
8
Safety Infor
mation