Certified International DAStape - Manual (Page 11)

Chapter 2. Installing DAStape
11
2. Set the protected DAStape on a clean, stable work surface (Figure 2-2).
3. Remove the foam from each end of the DAStape, one end at a time.
Caution: Be sure to support the first end before removing the foam from
the second end.
4. Move the DAStape to the installation site when you are ready to connect it.
Note: Keep DAStape’s packing materials in a safe place for moving or
shipping the DAStape in the future. Any damage caused to
DAStape due to improper packaging may void its warranty.
Figure 2-2 The DAStape in its foam supports.
Figure 2-3 Remove the foam from the DAStape.