Certified International DAStape - Manual (Page 18)

Chapter 4. DAStape 100 Tape Drives and Media
18
AIT Tape Drive LEDs
The AIT tape drive has three light emitting diodes, or LEDs, on the front of the drive,
as shown in Figure 4-1.
Busy Indicates drive read and write activity.
Tape Indicates tape load, unload activity and error rate information.
Status Indicates the status of the tape drive including whether the tape inside is write
protected, is a cleaning tape, or if the drive failed a self test.
Figure 4-1 The AIT drive sled, showing its faceplate and LEDs.
LEDs