Avaya P460 - Manual (Page 64)

Chapter 8 Avaya MSNM P460 Manager
50 Avaya P460 Installation and Maintenance Guide
Running the Avaya MSNM P460 Manager
Note: You should assign an inband or out-of-band interface IP address to the switch
before beginning this procedure.
1 Open your browser.
2 Enter the URL of the switch in the format http://aaa.bbb.ccc.ddd where
aaa.bbb.ccc.ddd
is the inband or outband interface IP address of the
switch.
Note: The user name is “root”
The default password for read-only access is “root”
The default passwords for read-write access is “root”.
Note: The P460 Manager passwords are the same as those of the CLI. If you change
the passwords of the CLI then those passwords become active for Web management
as well. For further information on the passwords, please refer to Chapter 9.
X The welcome page is displayed.
Figure 8.1 The Welcome Page