Avaya P460 - Manual (Page 75)

Avaya P460 Installation and Maintenance Guide 61
Chapter 10
Configuration Defaults
Introduction
This chapter defines the default parameters for the P460 switch.
Default System Parameters
Table 10.1 Default System Parameters
Parameter Default Value
All IP addresses N/A (0.0.0.0)
Default gateway N/A (0.0.0.0)
CLI timeout 15 minutes
User name root
Password root
PPP interface Disabled
Out-of-band interface Disabled
In-band interface Disabled
In-band ARP Tx interval 5 seconds
Out-of-band ARP Tx interval 5 seconds
VLANs 1 on all ports
Spanning Tree Enabled
Bridge priority for Spanning Tree 32,768
NTP server IP address N/A
Time zone offset 0 hours
Timezone GMT
Read-only SNMP community string public