Avaya P460 - Manual (Page 74)

Chapter 9 User Authentication
60 Avaya P460 Installation and Maintenance Guide
Allowed Managers
With the Allowed Managers feature, the network manager can determine who may
or may not gain management access to the switch. The feature can be enabled or
disabled (default is disabled). When enabled, only those users that are configured in
the Allowed Managers table are able to gain Telnet, HTTP, and SNMP management
access to the switch.
You can configure up to 20 Allowed Mangers by adding or removing their IP
address from the Allowed Managers List.
Note: The identification of an “Allowed Manager” is done by checking the Source IP
address of the packets, thus if the Source IP address is modified on the way (NAT,
Proxy, etc.), even an “Allowed Manager” will not be able to access the P460.
Allowed Manager CLI Commands
In order to... Use the following command...
When set to enabled - only
managers with ip address specified
in the allowed table will be able to
access the device set allowed managers
Add/delete ip address of manager
to/from the allowed table set allowed managers ip
Show the IP addresses of the
managers that are allowed to access
the device show allowed managers table
Show whether the status of allowed
managers is enabled or disabled show allowed managers status
Show the IP addresses of the
managers that are currently
connected show secure current