Avaya P460 - Manual (Page 78)

Chapter 11 Basic Switch Configuration
64 Avaya P460 Installation and Maintenance Guide
System Parameter Configuration
Identifying the system
In order to make a P460 switch easier to identify, you can define a name for the
switch, contact information for the switch technician and the location of the switch
in the organization.
Operating parameters
You can use the following commands to configure and display the mode of
operation for the switch and display key parameters.
Display the commands available at
your current location in the CLI
hierarchy tree
In order to... Use the following command...
Configure the system name. set system name
Configure the system contact
person set system contact
Configure the system location set system location
In order to... Use the following command...
Configure the basic mode of
operation to either Layer 2 or
Routing set device-mode
Display the mode of operation show device-mode
Display system parameters show system
Display module parameters show module
In order to... Use the following command...