Samsung Galaxy Avant - Manual (Page 24)

Section 3: Call Functions and Contacts List 19
Changing a Speed Dial Entry Order
1. From the Speed dial screen, locate your desired slot.
2. Delete an existing entry and replace the now empty location with an existing Contacts entry.
3. Press
Back to return to the previous screen.
Making a Call Using Speed Dial
You can assign a short cut number to a phone number in the Contacts List for speed dialing.
1. From the Home screen, tap Phone.
2. Touch and hold a previously created speed dial location (numbers 2-100, or 1 if you are dialing voice
mail) until the number begins to dial.
3. If you are not certain of the speed dial location, tap Phone > Keypad tab > Menu >
Speed dial and scroll down the list to view the assigned phone number.
In Call Options
Your device provides a number of features that are available for use during a call.
Mutes or Unmutes
the call
Dialer
Adds a
new call
Activates or
Deactivates
speaker phone
Activates or
Deactivates
Bluetooth
headset
Active Call Menu
Recent
activity
Ends the call
Note: Extra volume features are disabled while using Wi-Fi Calling.
Personalizing the Call Sound Setting
During a call it may be necessary to adjust the sound of the incoming call by selecting an audio equalizer
setting for the current call.
1. From the currently active call, tap Menu > Personalize call sound.
Note: If prompted to enable the feature via the Call settings menu, go to Settings > Call settings > Personalize
call sound.
2. Select an available option. Choose from: Off, Soft sound, Clear sound, Adapt sound left, and Adapt sound
right.
Placing a Call on Hold
You can place the current call on hold whenever you want. If your network supports this service, you can also
make another call while a call is in progress.
To place a call on hold:
1. From the currently active call, tap Menu > Hold to place the current call on hold.
2. From the currently active call, tap Menu > Resume call to activate the call that is on hold.
To make a new call while a call is in progress:
1. From the currently active call, tap Add call to dial the second call.
2. Dial the new phone number and tap
Call.
To switch between the two calls:
► Tap the on-screen previous On hold number entry and select Swap Swap Swap. The previous In call number turns
gray and displays On hold. The new active call displays a green background behind the number.
Turning the Speaker phone on and off
While on a call, you can use your Speaker phone by following these steps:
1. Tap
Speaker
Speaker off to toggle the speaker phone on.
2. Tap
Speaker
Speaker on to toggle the speaker phone off.
Tip: When the speaker is turned On, the color of the speaker is green. When the speaker is turned Off, the
color of the speaker is white.
Muting a Call
1. Tap Mute Mute off to turn mute on so the other caller cannot hear you speaking.
2. Tap
Mute
Mute on to turn mute off and resume your conversation.
Switching to Bluetooth Headset
1. Pair the target Bluetooth headset prior to your call.
2. While on a call, switch to the Bluetooth headset instead of speaker by tapping
Bluetooth
Bluetooth headset off.
3. At the prompt, tap OK to enable Bluetooth if it is not already activated.
4. While on a call, switch back to the device speaker by tapping
Bluetooth
Bluetooth headset on.