Samsung Galaxy Avant - Manual (Page 62)

Section 8: Connections 57
Section 8: Connections
Accessing Device Storage
You can connect your device to a PC using an optional PC data cable using various USB connection modes.
Media device (MTP): allows you to transfer media files in Windows, or using an Android file transfer on a Mac.
Camera (PTP): allows you to transfer photos using the camera software, and transfer any files onto a PC that
does not support MTP.
Note: To sync your device to your computer it is highly recommended that you install Samsung Kies which is
available at http://www.samsung.com/kies (for Windows/Mac).
Note: If you are a Windows XP user, ensure that you have Windows XP Service Pack 3 or higher installed on
your computer. Also, ensure that you have Samsung Kies 2.0 or Windows Media Player 10 or higher
installed on your computer.
Connecting as a Storage Device
You can connect your device to a PC as a removable disk and access the file directory. If you insert a
memory card in the device, you can also access the files directory from the memory card by using the device
as a memory card reader.
Note: The file directory of the memory card displays as a removable disk, separate from the internal memory.
1. Connect the USB cable to the device and connect the cable to the computer. After a few seconds, a pop-up
window displays on the PC when connected.
2. Open the folder to view files.
3. Copy files from the PC to the memory card.
Wi-Fi Connections
About Wi-Fi
Wi-Fi (short for "wireless fidelity") is a term used for certain types of Wireless Local Area Networks (WLAN).
Wi-Fi communication requires access to an existing and accessible Wireless Access Point (WAP). These
WAPs can either be Open (unsecured) as within most Hot Spots, or Secured (requiring knowledge of the
Router name and password).
Note: After you complete a connection to an active Wi-Fi network, the Wi-Fi Calling feature will automatically be
enabled.
Note: For additional information on WPS Connections, refer to “WPS Push Button” on page 62 and “WPS
PIN Entry” on page 62.
Activating Wi-Fi
By default, your device’s Wi-Fi feature is turned off (deactivated). Activating Wi-Fi allows your device to
discover and connect to compatible in-range WAPs (Wireless Access Points).
1. From the Home screen, tap Apps > Settings > Wi-Fi.
2. In a single motion touch and slide the Wi-Fi slider to the right to turn it on. The device scans for available
in-range wireless networks and displays them under Wi-Fi networks on the same screen.
Deactivating Wi-Fi
1. From the Home screen, tap Apps > Settings > Wi-Fi.
2. In a single motion touch and slide the Wi-Fi slider to the left to turn it off.
– or –
Activate and Deactivate Wi-Fi from the Notification bar.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can reduce battery life and use times.
Connecting to a Wi-Fi Network
1. From the main Wi-Fi screen, tap the network you wish to connect to.
Note: When you select an open network you are automatically connected.
2. Enter a wireless password (if necessary).
3. Tap Connect.
Manually Add a New Network Connection
1. From the main Wi-Fi screen, tap Add Wi-Fi network.
2. Enter the Network SSID (the name of your Wireless Access Point).
3. Tap the Security field and select a security option. This must match the current security setting on your
target WAP.
4. Enter your WAP’s password if the WAP is secure.
5. Tap Connect to store the new information and connect to the target WAP.
Note: No prompt to enter the WAP key displays if this is the second time to connect to a previously accessed
or secured wireless network. The WAP key is required when the device is reset using factory default
settings.
Manually Scan for a Wi-Fi Network
1. From the main Settings screen, tap Wi-Fi.
2. In a single motion touch and slide the Wi-Fi slider to the right to turn it on.
3. Tap Scan.