KERN & SOHN MLB 50-3C - Manual (Page 29)

MLB_C-BA-e-1431 29
9.6 P1-05 temperature calibration
This function is used to measure the temperature of the instrument. Only a check will
be carried out, no variables will be changed.
 For preparation/installation of temperature calibration set, see chap. 9.3.

Begin temperature calibration
Keep pressing until tSt_Co appears.
. The display to enter the temperature value to be
tested will appear.
Select the desired temperature with the navigation
keys.
Confirm entry.
Enter permitted deviation with the navigation
keys.
Confirm entry.
Enter serial number of the temperature
calibration set with the navigation keys.
Confirm entry.