KERN & SOHN ALJ 310-4A - Manual (Page 60)

ALJ/ALS/PLJ/PLS-BA-e-1338 60
10.2.2 Determining density of liquids
 Fill sample liquid into a vessel, e.g. a pitcher.
 Heat sample liquid until temperature is constant.
 Prepare a glass sinker with known density
 In weighing mode press MENU button. The first menu item „count“ is displayed.
 Press MENU button
 Acknowledge using PRINT button, the current setting is displayed.
 Using MENU button select
„d Liquid“
 Confirm by pressing the PRINT button.
 Use the arrow buttons    to enter density of the glass sinker.
 Confirm input by pressing the PRINT button.