12 error messages, 13 service, maintenance, disposal – KERN & SOHN ALJ 310-4A User Manual

Page 76

Advertising
background image

ALJ/ALS/PLJ/PLS-BA-e-1338

76

12 Error messages

ERR01

Weight value instable or zeroing not possible. Check the
environmental conditions.

ERR02

Adjustment error, e.g. environmental conditions instable

ERR03

Adjustment error e.g. incorrect adjustment weight}

ERR04

Piece weight too small/instable

ERR05

Data transfer not possible, as weighing value is instable. Check
the environmental conditions.

ERR06

Weighing value in density determining mode instable.
Check the environmental conditions.

ERR07

Incorrect data reading
(piece counting, density determination,…)

ERR08

Error at internal adjustment

UNLOAD”:

Weighing range not achieved.
Check position of the weighing plate

CAL But

Adjust balance

Weighing range exceeded, placed load exceeds the capacity of
the balance. Unload the balance.

Weighing range not reached, e.g. weighing plate not in place

13 Service, maintenance, disposal

13.1 Cleaning

Before cleaning, please disconnect the appliance from the operating voltage.

Please do not use aggressive cleaning agents (solvents or similar agents), but a
cloth dampened with mild soap suds. Ensure that no liquid penetrates into the device
and wipe with a dry soft cloth.
Loose residue sample/powder can be removed carefully with a brush or manual
vacuum cleaner.

Spilled weighing goods must be removed immediately.

13.2 Service, maintenance

The appliance may only be opened by trained service technicians who are authorized
by KERN.
Before opening, disconnect from power supply.

13.3 Disposal

Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.

Advertising
This manual is related to the following products: