KERN & SOHN GAB 30K5DNM - Manual (Page 22)

22 GAB-N-BA-e-1315
Operation Display
How to carry out linearization:
 Switch on the balance and during the
selftest press the and the
button at the same time.
„LoAd 0“ followed by LoAd 1“ will be
displayed.

 Place the second adjustment weight.
 After the apparition of the stability
display, „LoAd 2“ will be displayed
 Put on the third adjustment weight
 After the apparition of the stability display,
„LoAd 3“ will be displayed
 Put on the forth adjustment weight
(max load)
 After the apparition of the stability display,
„LoAd 2“ will be displayed
 Third adjustment weight
 After the apparition of the stability display,
„LoAd 1“ will be displayed
 Second adjustment weight
 After the apparition of the stability display,
„LoAd 0“ will be displayed
 First adjustment weight (weighing plate
empty)
 After successful linearization the balance
automatically returns to weighing mode.
In case of an adjustment error or incorrect adjusting weight the display will show an
error message; repeat linearization process.