KERN & SOHN GAB 30K5DNM - Manual (Page 23)

GAB-N-BA-e-1315 23
10 Operation
10.1 Weighing

GROSS
ZERO
 Turn on the scales by pressing the ON/OFF button
underneath the scales on the right.
The balance will carry out a self-test. The balance is ready for
weighing when the weight display „0.0“ appears.
 When required, the scales can be reset to zero at any time
using
0
.
Printout example:
N 0.500 kg
10.2 Weighing with tare
GROSS
(Example)

NET
 Deposit weighing receptacles
 After successful stop check press the
TARE
button.
The zero display and the symbol NET will appear.
The weight of the container is now internally saved.
 When the weighing container is removed, its weight will be
shown as a negative value.
 The taring process can be repeated any number of times,
e.g. when adding several components for a mixture (adding).
The limit is reached when the whole weighing range is
exhausted.
GROSS
ZERO
 To delete the tare value, remove load from weighing plate
and press
TARE
.