KERN & SOHN GAB 30K5DNM - Manual (Page 28)

28 GAB-N-BA-e-1315
10.6 Manual totalizing
This function is used to add the individual weighing values to the summation memory
and, if a printer is connected to provide a printout when the stability display appear
and the
PRINT
ESC
key pressed.
(For details how to set this function see chap. 11 menu “ACC on”)
(Example)

(Example)
 Place load A
Wait until stability display appears
 Press PRINT
ESC
ACC 1 followed by the weighing value will appear and the
weighing value will be saved to the summation memory and
possibly printed.
 Remove load A
Further loads can only be added after the display has
returned to zero.
(Example)

(Example)

GROSS
ZERO
 Place load B
Wait until stability display appears
 Press PRINT
ESC
again
ACC 2, followed by the total weight will be displayed and the
weighing value added to the summation memory and
possibly printed.
 Remove load B
Further loads can only be added after the display has
returned to zero.
 Add more weighed goods as described before.
Please note that the balance must be unloaded between the
individual weighing procedures.
 You can repeat this process until the capacity of the scales is
exhausted.