KERN & SOHN KXS-TM - Manual (Page 102)

19.5.1 Parameter „adjustment to site conditions “ (function „CFn 01”)
In the case of change to the settings in CFn 01 the settings in FNC 05 are
automatically overwritten, see chapter 10.5.
 Call up function „CFn 01“, see chapter 18.5.
 Press the TARE-key, current setting appears.
 Select desired settings with TARE or UNIT key.
Zero 0

Zero 9
Switch Automatic zero-adjusting switch on and off and select zero
range.
You can select 0 (switched off), 1d, 2d, 3d, 4d, 5d, 6d, 7d, 8d, 9d
Default setting: „0“
 Confirm with TARE key, the current stability settings are indicated.
102 KXS/KXG-TM-BA_IA-e-1420