KERN & SOHN KXS-TM - Manual (Page 69)

RJ Hi /Lo/ OK status + display value without status
Example:
Hi/ Lo/ OK status Sample display
Lo (001) 001+ 2.000
OK (010) 010+ 3.000
Hi (100) 100+ 4.000
RK Hi/Lo/ OK status + gross weight without status (example see "RJ").
RL Rear one/ Lo/ OK status + net weight without status (example see "RJ").
RS Show tolerance limit
RS

: Class (00 ~ 99) *  : LO or HI
HI Display of the adjusted upper limit value
LO Display adjusted lower limit value
Example: Command RS02LO<CR><LF>
Response RS02LOXXXXXX<CR><LF>
WS Set tolerance limit
WS
 XXXXXX
: Class (00 ~ 99) *  : LO or HI XXXXXX: Enter the limit value
HI Enter the value for the upper limit
LO Enter the value for the lower limit
Example: Command WS00HI001000<CR><LF>
Response WS00HI001000<CR><LF>
####### Example:
Value Position decimal point
CR LF
1 2 3 4 5 6 1
Display
*dependent on model
Should it be sent continuously, the command must be preceded by %.
If stable weight values are to be sent, the command must be preceded by #.
KXS/KXG-TM-BA_IA-e-1420 69