KERN & SOHN KXS-TM - Manual (Page 33)

10.3 Weighing with tolerance range (function "FnC 03 „)
You can set an upper or lower tolerance limit when weighing with tolerance range
and thus ensure that the weighed load remains exactly within the set tolerance limits.
Tolerance checks such as dosing, portioning and sorting the display above or below
the tolerance levels with a visual and acoustic signal (depending on the setting in the
menu).
Optical signal:
Three indicators show whether the material being weighed is located within the two
tolerance limits. The indicators provide the following information:
Weight less than nominal weight and below the lower
tolerance
Weight within tolerance limits
Weight more than the nominal weight and above the
upper tolerance
KXS/KXG-TM-BA_IA-e-1420 33