KERN & SOHN KXS-TM - Manual (Page 47)

10.8 Automatic storage of zero point (function "FnC 10 “ )
This function is only available for unverified weighing systems (CFn 02 = 0).
 Call up function "FnC 10", see chapter 10 "Navigation in the menu“.
 Press the TARE-key, current setting appears.
 Select desired settings with TARE or UNIT key.
off Function switched off (factory setting)
on If the function is switched on, the last zero point is stored. After
switching the appliance off and on or after a power failure the
equipment with the stored zero point continues to work.
 Confirm with the TARE key, the display returns back to the menu.
 Return to weighing mode, see chap. 10.
KXS/KXG-TM-BA_IA-e-1420 47