KERN & SOHN KXS-TM - Manual (Page 49)

10.10 Auto Zero
This function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the “stability
compensation“. (e.g. slow flow of liquids from a container placed on the balance,
evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off this
function.
This function is only available for unverified weighing systems (CFn 02 = 0).
For verified weighing systems see chapter 18.5.5
 Call up function "FnC 13", see chapter 10 "Navigation in the menu“.
 Press the TARE-key, current setting appears.
 Select desired settings with TARE or UNIT key.
off Function switched off (factory setting)
on When the balance is cleared the zero point is corrected automatically.
 Confirm with the TARE key, the display returns back to the menu.
 Return to weighing mode, see chap. 10.
KXS/KXG-TM-BA_IA-e-1420 49