KERN & SOHN MWS 400K100DM - Manual (Page 41)

7.6 Initial start-up
To obtain accurate weighing results with electronic scales, the appropriate operating
temperature is to be provided for them (refer to „Warm-up time”, section 1).
During warm-up the scale must be connected to power supply and switched on
(mains socket or batteries).
The accuracy of the scale depends on the local acceleration of gravity.
The value of acceleration of gravity is given on the rating plate.
7.7 Menu overview of verified scales
When the scale is switched on, hold the [
→0←] key pressed for about 3 seconds
until the display shows successively the „SETUP” and „A.OFF” symbols.
Selection is carried out with the [TARE]
and [HOLD] keys.
A.OFF = Auto off: 120 s / 180 s / 240 s / 300 sec/ OFF
bUrr = Audible signal: ON/OFF
End =
Save the new setting and exiting the menu
When the „End” is selected, the setting can be finished with the [HOLD] key.
0.00 kg
MPS / MTS / MXS / MWS-BA-e-1417 41