Malone MPG460G 2011 - Manual (Page 13)

800-295-0042 ext 206
[email protected]
13
MPG460G
8. Wiggle the spring eyes into the front hanger brack-
ets and bolt using 1/2” x 3” bolts and self locking
nuts. Tighten the shackle bolts ONLY until they grip
the sides of the brackets. This is a hinge, the spring
needs to move freely.
10. Slip the hub caps thru the wheels
from the back then mount the wheels
onto the hubs and hand tighten the lug
nuts.
9. Now that the axle assembly is at-
tached to the frame, tighten the axle
plate U-bolts evenly until there is a
slight bend in the tie plates.
11. Stand behind the trailer, lift
the rear cross member at one
corner and fl ip the trailer over onto
the tires.
ALWAYS BEND FROM YOUR
KNEES WHEN LIFTING. IF THE
TRAILER IS TOO HEAVY FOR
YOU TO FLIP
SAFELY GET
SOME FRIENDS
TO ASSIST
YOU.
12. Tighten
the lug fi rmly
to 75 to 85 foot
pounds
of torque.