Malone MPG460G 2011 - Manual (Page 6)

MPG460G
800-295-0042 ext 206
[email protected]
6
4. Pass the wiring harness into
the grommet and out the front
end of the tongue as shown.
Stretch out the white wire and
leave an equal length of the
green/brown/yellow wire outside
the grommet as shown. This
length of wires will be the con-
nector to your tow vehicle.
6. Now its time to pass the wire ends thru the tongue.
Make sure the wires are tangle free, then attach a
weight to the end of the wires. A large socket works
great as shown or you could tape a big bolt to the
wires. Tip the tongue up and let gravity work for you.
Feed the wire and let the weight slide through the
tongue pulling the wires with it.
5. Roll this wire so it
doesn’t get accidentally
pulled inside the tongue.