Malone MPG460G 2011 - Manual (Page 15)

800-295-0042 ext 206
[email protected]
15
MPG460G
4. Check that the coil of wiring harness outside the tongue grommet is still full length.
5. Route the
GREEN/BROWN wire along the
RIGHT side of the frame.
Route the YELLOW/BROWN wire
along the LEFT as shown.
6. Use the clips provided to secure the wire to
the inside of the frame channel as shown
7. Route the wires thru the mid cross member as shown then secure the har-
ness in place using the frame clips provided. Use your knife to CAREFULLY
divide 1/2” of the green/
brown wire and the
yellow brown wire just
below the side lamp as
shown.
8. Then grasp either side of the cut with your fi ngernails
and pull to separate 3” of wire as shown.