MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 31)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 30
•
If you wish to make changes, press the “STOP/NO” key. If the name is
correct, press the “START/YES” key. The screen will now read:
WA I T I N G F O R D R I V E S R E A D Y
A N A L Y Z I N G F O R M A T . . .
Once the format is determined, hard disk image creation will begin.
Depending on the format type, something similar to the following will
be displayed on the screen:
M A S T E R S I Z E 2 5 5 M B
S I N G L E T R A C K M O D E 1
When working with audio (CD-DA), mixed mode, or CD-Extra discs,
additional screens indicating the presence of sub-indexes and ISRC
codes may also be displayed. Progress will be displayed during hard disk
image creation:
R E A D n n n n n
n o o o o o o o o o o 3 7 %
If discs are also being copied at the same time, the display will instead
read:
C O P Y n n n n n
n o o o o o o o o o o 3 7 %
R E M A I N I N G T I M E 0 3 :0 5
Upon successful completion, the master disc or any copied discs will
be ejected. The screen will read:
A R C H I V E O K , P R E S S S T A R T
The master disc is now stored as an image on the hard disk.
•
Press the “START/YES” key, and you will be returned to the main
operating screen:
1 6 X C O P Y O R C O M P A R E