MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 34)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 33
C O P Y O K , P R E S S S T A R T
•
Press the “START/YES” key, and you will be returned to the main
operating screen:
1 6 X C O P Y O R C O M P A R E
Note: If discs failed to copy properly, the recorder tray drawers stay
closed upon completion. These discs should not be used. To
help you determine the nature of the problem, error messages
can be displayed by pressing the “9” key on the keypad.
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the Multiple Images feature “enabled”, the steps are as follows:
•
From the main operating screen depicted below:
1 6 X C O P Y O R C O M P A R E
•
Load as many blank discs as are required into the recorders. Wait for the
LED lights on the of all the recorders to stop flickering (this may take up
to 30 seconds).
•
Press the “COPY” key on the keypad. The screen will now read:
F R O M H D ? ( S T A R T ? S T O P )
•
Press the “START/YES” key. The screen will now read:
T E S T [ S T A R T ] = O K
[ 0 ] = T E S T [ 1 ] = N O N E
The name of the currently selected image is displayed in the top left
corner of the screen. Along the bottom line of the display will scroll the
available images identified by their number (0, 1, 2, 3, 4 and 5), and
their name. The CD-5916 defaults to the first image (0) and in this
example the image is named “TEST”. For the purposes of this example,