MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 57)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 56
Setting The Machine ID
The Machine Identification number (Machine ID) is a user defined six digit
code that is written into data discs copied using the CD-5916’s
SmartSTAMP feature.
To set the Machine ID the steps are as follows:
•
Turn on the power to the CD-5916 and wait for the screen depicted
below:
C H E C K I N G S Y S T E M . . .
•
While this is displayed, press and hold the “4” key for five seconds and
release. The screen will now read:
E N T E R I D :
•
Using the number keys on the keypad enter a six digit numeric Machine
ID. Press the “START/YES” key when satisfied with your selection (the
“STOP/NO” key can be used as a backspace key). After the
“START/YES” key is pressed the CD-5916 will continue starting up as
usual.