MF Digital DIRECTOR Series (Rev: 06/01/02) - Manual (Page 18)

DIRECTOR Series Operator’s Guide Document Revision: 0802
Page 17
Installing The Spindles
Position the DIRECTOR unit so that its front is facing you. Locate the three
metal spindle guide pins found on the top deck of the unit to the left, center,
and right of the picker arm column.
In the bottom center of each spindle base is a hole. Align the hole with the
guide pin found on the deck of the DIRECTOR unit. Place one spindle on
top of each of the guide pins so that the spindles stand vertically.