MF Digital DIRECTOR Series (Rev: 06/01/02) - Manual (Page 45)

DIRECTOR Series Operator’s Guide Document Revision: 0802
Page 44
Trusted Drives
The TRUSTED DRIVES window allows you to specify which hard disk
drives are capable of sustaining the data transfer rate necessary for
recording CDs. The C: drive (which houses the DIRECTOR’s operating
system and application) should never be used as a recording source. The
factory settings should be sufficient for most uses.
To change the TRUSTED DRIVES:
• Select or de-select the check box next to the appropriate drive.
Unless you have added a raid solution, or other additional fast storage, you
should never change the default settings. EIDE drives should not be used
for this purpose. Please consult your MediaFORM reseller if you wish to
add additional storage.
Note: