MF Digital DIRECTOR Series (Rev: 06/01/02) - Manual (Page 44)

DIRECTOR Series Operator’s Guide Document Revision: 0802
Page 43
System Drives
The SYSTEM DRIVES window allows you to specify which hard disk
drives the DIRECTOR uses exclusively. The factory settings should be
sufficient for most uses.
2000-8: Be sure that: D:, E:, F:, G:, H:, I:, J:, K:, and L: are selected. DO
NOT SELECT C:.
2000-4: Be sure that: D:, E:, F:, and G: are selected. DO NOT SELECT
C:.
2000-2: Be sure that: D:, and E: are selected. DO NOT SELECT C:.
example of 2000-4
To change the SYSTEM DRIVES:
• Select or de-select the check box next to the appropriate drive.
• Click “Apply” after making the changes.