MF Digital DIRECTOR Series (Rev: 06/01/02) - Manual (Page 28)

DIRECTOR Series Operator’s Guide Document Revision: 0802
Page 27
Starting Up
• Flip the DIRECTOR power switch to the “on” position.
• Flip the host computer’s power switch to the “on” position.
• Switch on the power to the Spectrum2 printer.
• Wait a minute or two while the system starts up. A series of diagnostic
information will be displayed and once complete the unit will display
the Begin Logon dialog box. The screen will now display:
• Press the CTRL, ALT and DELETE keys simultaneously to display the
Logon Information dialog box.
• Enter “mediaform” in lowercase letters for the password. Please note
that the password is case sensitive.
• Press the ENTER key. The screen will now display the DIRECTOR
desktop screen.