Microtel CellStat v.1.22 - Manual (Page 5)

MICROTEL CellStat
TM
3
INTRODUCTION
hank you for choosing the Microtel CellStat
TM
Dialer to implement your remote
alarm monitoring solution. You have chosen a product that is simple to set up and
easy to use. CellStat
TM
has been designed and manufactured to operate with
minimal operator intervention.
The Microtel CellStat
TM
features a single level, interactive command structure--there are
no multi-level menu structures to navigate. Commands are sent to the dialer through your
telephone either locally or during a call to or from the dialer, by pressing a sequence of
touch-tones on your telephone. Each command entered is acknowledged with a spoken
response from CellStat
TM
, providing verification that the command was entered correctly
and understood by the dialer.
About this Manual : This manual is organized with the most crucial information in
the front; more advanced topics are saved for last or included in the appendices.
Who Should Read this Manual: Anyone involved with use of the dialer should
read the General Description and Operation chapters of the manual. The Operation
chapter in particular should be read by any personnel who may be required to respond to
alarm calls from the dialer. The additional chapters can be read at a later time, or when
necessary by authorized personnel to maintain the dialer or troubleshoot any problems
you might encounter. System administrators should read the Advanced Topics chapter
for information on the use of the dialer’s remote software configuration capabilities.
In a Hurry to Setup? Read the Quick Start section of the Installation chapter.
If you encounter a difficulty that cannot be resolved using the information in the manual,
call MICROTEL at (225) 303-0436.
Again, thank you for choosing MICROTEL.
T