Microtel Series 1000 - Manual (Page 13)

MICROTEL Series 1000 Dialer
7
signal, indicating to the dialer that it may resume data transmission. The DTR hardware
handshaking protocol is a common method supported by most serial interfaces.
Refer to Chapter 3 and Chapter 5 for more information on sending a FAX report.
How can I Make an Alarm Sound in the Vicinity of the Dialer? Any digital
output channel can be configured as a local alarm type. A local alarm will be turned on
whenever a new alarm condition exists within the dialer. This output could be connected
to a siren or bell to warn the local area of the alarm condition. Refer to Chapter 3 for
more information on local alarms.
Can an S1000 Dialer Talk to a Computer? Yes. Software is available to
configure and monitor your dialer’s I/O. Please call factory for additional information.