Microtel Series 1000 - Manual (Page 27)

MICROTEL Series 1000 Dialer
21
Basic System Information Overview
The following commands configure and report the current values for the overall system
level operations of the Series 1000. These settings include:
Section Current
Setting
Change
Setting Meaning
Voice System Name *001 **001~ User defined Voice System Name for the
Dialer
Call Spacing Time *002 **002MM Time in minutes the dialer waits after
making an answered outgoing call before
making another one
Ring Count *003 **003nn Waits nn rings before answering an
incoming call
Access Code *004 **004nnnn Code to get access to the Dialer during a
callin or callout
Message Repeat
Count *005 **005nn Number of times the Dialer will repeat the
alarm messages for a callin or callout
Voice Interaction
Delay *006 **006n Delay time between entering a command and
the dialer responding to this command
Callback
Acknowledge *008 **008n Enabling Callback Acknowledge.
n=1 Enables it. n=0 Disables it
Snooze Delay Time
Interval *074 **074
DDHHMM
The delay after which the Dialer will re-arm
an acknowledged alarm so that alarm will
again generate callouts
System Telephone # *010 **010p** The Dialer’s telephone number (Required
for faxes to comply with FCC
Regulations)
A Glossary of Dialer Terminology that defines these parameters with respect to the
Series 1000 operation is provided in the Appendix.