Microtel Series 1000 - Manual (Page 41)

MICROTEL Series 1000 Dialer
35
Operations
This section details the normal operation of a dialer, from both local and remote
locations. Sections will detail the following actions:
z Alarm Acknowledgment
z System Status
z Site Control
z Printer Operations
A telephone connected to the Series 1000 PHONE jack can be used both as a normal
telephone by pressing a ‘9’ for a connection to the line, or as the human-to-machine
interface to configure and inquire the Series 1000 dialer.
To use the outside line:
1. Pick up the local telephone connected to the Series 1000 jack labeled PHONE.
2. Dial
‘9’.
3. The telephone will now be connected to the outside phone line.
4. Listen for the dial tone.
5. You may now place a telephone call.
6. To get back to the Series 1000, hang-up the phone, then pick it up again.
When the local telephone rings, you may receive the call by picking up the handset
before the dialer’s answer delay (ring count) elapses.