Citizen Systems CBM-270 - Manual (Page 57)

CBM-270 User’s Manual
•
Control by the lowest bit (n0) is shown as follows:
n0 Type
0 Canceling highlighting
1 Specifying highlighting
•
This is effective to all characters.
•
Dot configuration of a highlighted character includes one extra dot added at its side.
[Caution]
•
The print result of Double printing and highlight character printing is completely same.
[See Also] ESC !, ESC G
[Example]
[Sample Program] [Print Results]
LPRINT CHR$ (&H1B) ; "E" ; CHR$ (0) ;
LPRINT "AAABBB" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "E" ; CHR$ (1) ;
LPRINT "AAABBB" ; CHR$ (&HA) ;
ESC G n
[Function] Specifying/Canceling double printing
[Code] <1B> H <47> H <n>
[Outline] Specifying/canceling the double printing.
•
"n" is valid only for the lowest bit (n0).
•
Control by n is shown as follows.
n0 Type
0 Canceling double printing
1 Specifying double printing
This is effective to all characters.
[Caution]
•
The print result of Double printing and highlight character printing is completely same.
[See Also] ESC E
[Sample Program] [Print Results]
LPRINT CHR$ (&H1B) ; "G" ; CHR$ (0) ;
LPRINT "AAABBB" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "G" ; CHR$ (1) ;
LPRINT "AAABBB" ; CHR$ (&HA) ;
ESC J n
[Function] Printing and Feeding paper n/203 inch
[Code] <1B> H <4A> H <n>
[Range] 0
≤
n
≤
255
[Outline] Prints data inside the print buffer and feeds paper by n/360 inch. Since an actual mechanical
pitch is 1/203 inch, it is internally converted approximate to the value specified with this
command.
•
Specified volume does not remain.
•
The beginning of the line is to be considered as the next printing start position.
•
Initial value is not defined.