Gs ^ n1 n2 n3 – Citizen Systems CBM-270 User Manual
Page 79
CBM-270 User’s Manual
GS ^ n1 n2 n3
[Function]
Executing the macro
[Code]
<1D> H <5E> H <n1> <n2> <n3>
[Range]
0
≤
n1
≤
255
0
≤
n2
≤
255
0
≤
n3
≤
1
[Outline]
Executing contents defined in macro.
•
"n1
∼
n3" indicate as follows:
n1 : The number of times of macro execution
n2 : Waiting time on macro execution
Waiting time of n2
×
100 msec is given for every execution.
n3 : Macro execution mode
n3
Mode
0
Continuous execution
1
Execution by LF SW
Continuous execution:
The Macro is executed n1 times continuously at the time intervals
specified by n2.
Execution by FEED S:
After waiting for lapse of time specified by n2, the ALAME LED
flickers and the LF switch is waited to be pressed. When it is
pressed, the macro is executed once.
This action is repeated n1 times.
[Caution]
•
When this command is received while in macro definition, suspension of macro definition
is indicated. At this time, the defined content is cleared.
•
No execution takes place when macro is held undefined or n1=0.
•
While in macro execution with n3=1, paper feed with the LF SW is not available.
[Default]
•
Initially, this command is not specified.
[See Also]
GS :
[Sample Program]
[Print Results]
See Sample Program and Print Results for GS : on Page 78.