Canon IMAGE FORMULA DR-6010C - Manual (Page 10)

Chapter 1 Before Using the Scanner
1-3
Handling
WARNING
Note the following precautions whenever using the scanner. Failure to do so may result in a
fire or electric shock.
■ Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable
substance near the scanner.
■ Do not cut, damage, or modify the power cord. Do not place heavy objects on the power
cord, and do not pull or excessively bend the power cord.
■ Never connect the power cord when your hands are wet.
■ Do not connect the scanner to a multi plug power strip.
■ Do not knot or coil the power cord as this may result in a fire or electric shock. When
connecting the power cord, make sure that the power plug is securely and completely
inserted into the power outlet.
■ Do not use power cords other than the power cord provided with this scanner.
■ Never try to take the scanner apart or modify it in any way, as this is dangerous and may
lead to a fire or electric shock.
■ When cleaning the scanner, turn the power switch OFF and disconnect the power cord
from the power supply.
■ Clean the scanner using a slightly dampened cloth which has been well wrung out. Never
use alcohol, benzene, paint thinner, or any other flammable substances.
■ If the scanner makes strange noises, or gives off smoke, heat, or strange odors, or the
scanner does not function or other abnormalities occur when you use the machine,
immediately turn the power switch OFF, and disconnect the power plug from the power
outlet. Then, contact your local authorized Canon dealer or the service representative for
further information.
■ Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever
become damaged, immediately turn the power switch OFF, and disconnect the power plug
from the power outlet. Then, contact your local authorized Canon dealer or service
representative to have the unit serviced.
■ Before moving the scanner, be sure to turn the power switch OFF, and disconnect the
power plug from the power outlet.
CAUTION
■ Do not install the scanner on a surface that is unstable or tilted, or in an area subject to
excessive vibrations, as this may cause the scanner to fall, resulting in personal injury or
damage to the scanner.
■ Do not block ventilation openings. Doing so could case the scanner to overheat, creating
a risk of fire.
■ Never place small metal objects such as staples, paper clips, or jewelry on the scanner.
These items may fall into the scanner, and cause a fire or electric shock. Should such
objects ever fall inside the scanner, immediately turn the power switch OFF, and
disconnect the power plug from the power outlet. Then, contact your local authorized
Canon dealer or service representative to have the unit serviced.
■ Do not install the scanner in a humid or dusty location. Doing so might cause a fire or
electric shock.